Troubleshooting Guide

General Troubleshooting Guide
Tool Faults											Trouble Area If you need further assistance,  call 1-888-338-1049
											Bushing or Pilot: oversize
											Workholding: unsuitable
											Coolant: insufficient pressure
											Coolant: incorrect type
											Feed: erratic
											Feed: excessive
											Feed: insufficient
											Misalignment
											Spindle: speed high
											Spindle: speed low
											Incorrect nosegrind for material
											Tool unsupported beyond 30:1
											Tool contour incorrect
											Tool clearance incorrect
											Material - Heat treatment faults
											Material - Overheat & or closing in
											Material - Thin wall section
											Tool - Heel drag
											Tool - Needs resharp
											Tight hole
											Tool Vibration
											Workpiece not against bushing

Hole Faults